To program a new head key remote for Scion and Toyota And Honda, you'll need the car’s remote and the new key fob. Here’s a basic guide to help you through the programming process:
Things you’ll need:
- Steps To Program Remote Button Head Key For Honda Toyota Scion
- Existing working remote (if applicable)
- Your car keys
Jiffy locksmith®
Steps To Program Remote Button Head Key For Honda Toyota Scion
Steps to Program the Key Fob for Scion tC 2013:Step 1: Enter Programming Mode
- Start with all doors closed and unlocked.
- Insert the key into the ignition (but don’t turn it on) and remove it.
- Repeat inserting and removing the key 2 more times (for a total of 3 times).
- Close and open the driver door 2 times.
- Insert the key again (do not turn it) and remove it.
- Close and open the driver door 2 more times.
- Insert the key, turn it to the “ON” position (do not start the engine), and then back to “OFF.” Remove the key from the ignition.
- The locks should cycle, indicating the vehicle is in programming mode.
Step 2: Program the Remote
- Press both the lock and unlock buttons on the new key fob at the same time for about 1.5 seconds.
- Release both buttons.
- Press the lock button on the remote for about 2 seconds.
- The locks should cycle again, indicating successful programming.
Step 3: Exit Programming Mode
- To exit, just close the driver door and test the key remote by locking and unlocking the doors using the new remote.
Here are general steps to program a Remote Head Key Fob for both Toyota and Honda vehicles:
Honda Remote Head Key Fob ProgrammingEnter Programming Mode
- Insert the key into the ignition and turn it to the “ON” position without starting the engine.
- Press the lock or unlock button on the key fob.
- Turn the ignition back to the “OFF” position.
- Repeat this cycle (turning the key on and pressing a button on the fob) 3 times. On the third time, leave the ignition in the “ON” position.
Program the Remote
- Within 5 seconds, press the lock button on the remote.
- The door locks should cycle, indicating the key fob has been successfully programmed.
Exit Programming Mode
- Turn the ignition back to the “OFF” position and test the remote to ensure it operates the locks.
Toyota Remote Head Key Fob ProgrammingEnter Programming Mode
- Start with all doors closed and unlocked.
- Insert the key into the ignition and remove it without turning.
- Repeat inserting and removing the key 2 more times (for a total of 3 times).
- Close and open the driver door 2 times.
- Insert the key again (do not turn it) and remove it.
- Close and open the driver door 2 more times.
- Insert the key, turn it to the “ON” position (but don’t start the engine), and then back to “OFF.” Remove the key.
- The locks should cycle, indicating programming mode is active.
Program the Remote
- Press and hold both the lock and unlock buttons on the new key fob simultaneously for 1.5 seconds.
- Release both buttons.
- Press the lock button on the fob for about 2 seconds.
- The locks should cycle, confirming successful programming.
Exit Programming Mode
- Close the driver door and test the remote to ensure it locks and unlocks the doors properly.
Quote For Locksmith Services
Our Car Key Replacement Process
Contact Us: If you need a car key replacement, the first step is to call Jiffy Locksmith. Our customer service team will collect the necessary information about your vehicle and dispatch a locksmith to your location immediately.
Key Identification: Upon arrival, our locksmith will verify your vehicle’s make, model, and year to ensure we provide the correct key type. We have the tools and expertise to replace keys for most vehicles on the road today.
Key Cutting and Programming: Using advanced equipment, our locksmith will cut your new key to match your vehicle’s lock precisely. If your vehicle uses a transponder key or key fob, we’ll also program it to communicate with your car’s ignition system.
Testing and Verification: Before we leave, we’ll test your new key to ensure it works flawlessly with your vehicle. This includes starting the engine and checking that the key fob functions correctly, if applicable.
Spare Keys: We recommend having a spare key made at the same time. This can save you time and money in the future if you ever lose your key again.
If the programming process doesn’t work, you might need to consult your vehicle’s manual or reach out to a professional locksmith with expertise in automotive key programming.
Our Features
